KIT8002A rev. date: 28-jan- 11 ksd-xxxxxx-000 photo interrupter the contents of this data sheet are subject to change without advance notice for the purpose of improvement. when using this product, would you plea se refer to the latest specifications. description the KIT8002A is a high performance transmissive ty pe photointerrupter, combines high-output gaas ired with high sensitive phototransistor , features y pwb direct mount type y with the installation positioning boss y 8.0mm gap applications y printers y copiers y fax absolute maximum ratings (t amb =25 , unless otherwise specified) item symbol ratings unit power dissipation p d 100 ? forward current i f 60 ? reverse voltage v r 5 v input pulse forward current *1 i fp 1 a collector dissipation p c 100 ? collector current i c 40 ? collector-emitter voltage v ceo 30 v output emitter-collector voltage v eco 5 v operating temperature *2 topr -25 ~ +85 storage temperature *2 t stg -40 ~ +85 * 1. pulse width (tw) 100 ? , period (t) = 10msec. * 2. no icebond or dew.
rev. date: 28-jan- 11 ksd-xxxxxx-000 kit8002 a the contents of this data sheet are su bject to change without advance notice f or the purpose of improvement. when using this product, would you plea se refer to the latest specifications. electrical characteristics (tamb=25 , unless otherwise specified) operation is specified over the entire operating tem perature / humidity range unless otherwise specified . operating temperature topr +5 to +45 operating humidity (over topr range) hopr 5 ~ 95 %rh parameter symbol conditions min. typ. max. unit forward voltage v f i f =20ma - 1.2 1.4 v wavelength of emission p i f =20ma - 940 - nm input reverse current i r v r =3v - - 10 a v ce =5.0v, i f =0 ? output dark current i ceo e=0 lux - - 1 a collector current i c v cc =5.0v, i f =20ma 0.5 - 10 ma collector - emitter transfer charac- teristics saturation voltage v ce(sat) i c =0.5 ? , i f =20 ? - - 0.4 v see figure 1. for test circuit \
rev. date: 28-jan- 11 ksd-xxxxxx-000 kit8002 a the contents of this data sheet are su bject to change without advance notice f or the purpose of improvement. when using this product, would you plea se refer to the latest specifications. switching as a function of position 1. if the motion of the interrupter flag is vertical(perpendicular to the horizontal aperture slot) then the output must switch between approximately -0.25 to +0.25mm with respect to the optical axis. 2. if the motion of the interrupter flag is horizontal(parallel to the horizontal aperture slot) then the output must switch between approximately -0.50 to +0.50mm with respect to the optical axis. packaging 1. the part package contain the following information: - symbol - date code - lot code - the words "rohs compliant" cautions in usage 1. store and use where there is no exterior force that will cause change in shape. 2. store and use where there is no hydrogen sulfide gas, or any other corrosive gas. 3. the bending or cutting of the lead should be done at room temperature, no force being applied on the package. 4. solder the lead pin under conditions of the absolute maximum rating chart, and do not apply force on the lead pin after soldering. guarantee period and scope 1. period one year after delivery to the desired place. 2. scope replacement of products will be done, if any problems lie in our company's products. however, we are not liable for your damage by lack of caution. others any doubts concerning this specification should be discussed fully by both parties.
rev. date: 28-jan- 11 ksd-xxxxxx-000 kit8002 a the contents of this data sheet are su bject to change without advance notice f or the purpose of improvement. when using this product, would you plea se refer to the latest specifications. characteristics
rev. date: 28-jan- 11 ksd-xxxxxx-000 kit8002 a the contents of this data sheet are su bject to change without advance notice f or the purpose of improvement. when using this product, would you plea se refer to the latest specifications. package outline dimensions
|
